約 3,136,255 件
https://w.atwiki.jp/kapper1224/pages/31.html
Windowsのファイル上にループバックマウントしてインストールするのがWubiです。 インストール時のGrub.cfg設定を手動で設定する場合に利用します。 linux /ubuntu/install/boot/vmlinuz.efi debian-installer/custom-installation=/ubuntu/install/custom-installation iso-scan/filename=/ubuntu/install/installation.is automatic-ubiquity noprompt quiet splash boot=casper ro debian-installer/locate=ja_JP.UTF-8 keyboard-configuration/layoutcode=jp keyboard-configuration/variantcode= -- rootflags=sync initrd /ubuntu/install/boor/initrd.lz 最近Wubiを使用中にGrubからLinuxの設定が削除される事例があります。 必ず /boot/grub/grub.cfgのバックアップを取っておいて下さい。 sudo cp /boot/grub/grub.cfg /host/Users/(Owner)/Documents/ 特にroot.diskのUUIDだけは確実にバックアップを残しておいてください。 こちらに記載しました。 Wubi for ubuntuで22.04を使うとgrub.cfgでubuntuが削除される問題。grub.cfgバックアップ必須。要注意。 インストール後のWubi for Ubuntuのgrub.cfgがこちらです。 Ubuntu22.04の時のファイルです。 どうしてもテキスト入力でブートする際には使ってみてください。 # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ ${initrdfail} = 2 ]; then set initrdfail= elif [ ${initrdfail} = 1 ]; then set next_entry= ${prev_entry} set prev_entry= save_env prev_entry if [ ${next_entry} ]; then set initrdfail=2 fi fi if [ ${next_entry} ] ; then set default= ${next_entry} set next_entry= save_env next_entry set boot_once=true else set default= 0 fi if [ x ${feature_menuentry_id} = xy ]; then menuentry_id_option= --id else menuentry_id_option= fi export menuentry_id_option if [ ${prev_saved_entry} ]; then set saved_entry= ${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry= ${chosen} save_env saved_entry fi } function initrdfail { if [ -n ${have_grubenv} ]; then if [ -n ${partuuid} ]; then if [ -z ${initrdfail} ]; then set initrdfail=1 if [ -n ${boot_once} ]; then set prev_entry= ${default} save_env prev_entry fi fi save_env initrdfail fi; fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod ntfs set root= hd0,gpt3 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 601C565A1C562AF4 else search --no-floppy --fs-uuid --set=root 601C565A1C562AF4 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) font= /usr/share/grub/unicode.pf2 fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=ja_JP insmod gettext fi terminal_output gfxterm if [ ${recordfail} = 1 ] ; then set timeout=30 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=hidden set timeout=10 # Fallback hidden-timeout code in case the timeout_style feature is # unavailable. elif sleep --interruptible 10 ; then set timeout=0 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/10_linux_zfs ### ### END /etc/grub.d/10_linux_zfs ### ### BEGIN /etc/grub.d/10_lupin ### function gfxmode { set gfxpayload= ${1} if [ ${1} = keep ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ ${linux_gfx_mode} != text ]; then load_video; fi menuentry Ubuntu --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option gnulinux-simple-b1339699-a439-4ff8-bc5a-0067acab57b3 { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root= hd0,gpt3 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 601C565A1C562AF4 else search --no-floppy --fs-uuid --set=root 601C565A1C562AF4 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) linux /boot/vmlinuz-5.15.0-30-generic root=UUID=601C565A1C562AF4 loop=/ubuntu/disks/root.disk ro rootflags=sync quiet splash $vt_handoff initrd /boot/initrd.img-5.15.0-30-generic } submenu Advanced options for Ubuntu $menuentry_id_option gnulinux-advanced-b1339699-a439-4ff8-bc5a-0067acab57b3 { menuentry Ubuntu, with Linux 5.15.0-30-generic --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option gnulinux-5.15.0-30-generic-advanced-b1339699-a439-4ff8-bc5a-0067acab57b3 { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root= hd0,gpt3 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 601C565A1C562AF4 else search --no-floppy --fs-uuid --set=root 601C565A1C562AF4 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo Loading Linux 5.15.0-30-generic ... linux /boot/vmlinuz-5.15.0-30-generic root=UUID=601C565A1C562AF4 loop=/ubuntu/disks/root.disk ro rootflags=sync quiet splash $vt_handoff echo Loading initial ramdisk ... initrd /boot/initrd.img-5.15.0-30-generic } menuentry Ubuntu, with Linux 5.15.0-30-generic (recovery mode) --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option gnulinux-5.15.0-30-generic-recovery-b1339699-a439-4ff8-bc5a-0067acab57b3 { insmod gzio insmod ntfs set root= hd0,gpt3 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 601C565A1C562AF4 else search --no-floppy --fs-uuid --set=root 601C565A1C562AF4 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo Loading Linux 5.15.0-30-generic ... linux /boot/vmlinuz-5.15.0-30-generic root=UUID=601C565A1C562AF4 loop=/ubuntu/disks/root.disk ro recovery nomodeset rootflags=sync echo Loading initial ramdisk ... initrd /boot/initrd.img-5.15.0-30-generic } menuentry Ubuntu, with Linux 5.13.0-41-generic --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option gnulinux-5.13.0-41-generic-advanced-b1339699-a439-4ff8-bc5a-0067acab57b3 { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root= hd0,gpt3 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 601C565A1C562AF4 else search --no-floppy --fs-uuid --set=root 601C565A1C562AF4 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo Loading Linux 5.13.0-41-generic ... linux /boot/vmlinuz-5.13.0-41-generic root=UUID=601C565A1C562AF4 loop=/ubuntu/disks/root.disk ro rootflags=sync quiet splash $vt_handoff echo Loading initial ramdisk ... initrd /boot/initrd.img-5.13.0-41-generic } menuentry Ubuntu, with Linux 5.13.0-41-generic (recovery mode) --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option gnulinux-5.13.0-41-generic-recovery-b1339699-a439-4ff8-bc5a-0067acab57b3 { insmod gzio insmod ntfs set root= hd0,gpt3 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 601C565A1C562AF4 else search --no-floppy --fs-uuid --set=root 601C565A1C562AF4 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo Loading Linux 5.13.0-41-generic ... linux /boot/vmlinuz-5.13.0-41-generic root=UUID=601C565A1C562AF4 loop=/ubuntu/disks/root.disk ro recovery nomodeset rootflags=sync echo Loading initial ramdisk ... initrd /boot/initrd.img-5.13.0-41-generic } } ### END /etc/grub.d/10_lupin ### ### BEGIN /etc/grub.d/10_lupin_grub_install ### ### END /etc/grub.d/10_lupin_grub_install ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry Windows Boot Manager (on /dev/sda1) --class windows --class os $menuentry_id_option osprober-efi-8A54-9197 { insmod part_gpt insmod fat set root= hd0,gpt1 if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 8A54-9197 else search --no-floppy --fs-uuid --set=root 8A54-9197 fi chainloader /EFI/Microsoft/Boot/bootmgfw.efi } set timeout_style=menu if [ ${timeout} = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### menuentry UEFI Firmware Settings $menuentry_id_option uefi-firmware { fwsetup } ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/35_fwupd ### ### END /etc/grub.d/35_fwupd ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the exec tail line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z ${config_directory} -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg fi ### END /etc/grub.d/41_custom ###
https://w.atwiki.jp/kapper1224/pages/29.html
UbuntuのBay-Trail,Cherry-Trailユーザーカスタマイズが Linuxiumです。オリジナルのGrub.cfgです。 if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm fi set menu_color_normal=white/black set menu_color_highlight=black/light-gray menuentry Try Ubuntu without installing { set gfxpayload=keep linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper zswap.enabled=1 zswap.compressor=lz4 quiet splash --- initrd /casper/initrd.lz } menuentry Install Ubuntu { set gfxpayload=keep linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- initrd /casper/initrd.lz } # menuentry OEM install (for manufacturers) { # set gfxpayload=keep # linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --- # initrd /casper/initrd.lz # } menuentry Check disc for defects { set gfxpayload=keep linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --- initrd /casper/initrd.lz }
https://w.atwiki.jp/yukemuri_chui/pages/16.html
ubuntu serverインストール apache subversion trac backup
https://w.atwiki.jp/kobapan/pages/70.html
複数枚の画像を一括印刷 Gnome Photo Printer Windowsならデフォルトの印刷オプションで複数枚の画像を配置しての一括印刷ができるが、Ubuntuにはこれがない Nautilusのエクステンションにあっても良さそうだが、見つからない ので、Gnome Photo Printer を入れた $ sudo apt-get install gnome-photo-printer gnome-volume-control-applet パネルにあった音量を調節するアプレットが、いつの間にかなくなっていたので、復活させた システム>設定>自動起動するアプリケーション>追加 コマンド欄に、gnome-volume-control-appletと記入 その他欄を適当に記入して、保存をクリック Flickr Uploader Postr $ sudo apt-get install postr MP3のタグを編集する EasyTAG $ sudo apt-get install easytag MP3を切り貼りする cutmp3 $ sudo apt-get install cutmp3 mp3の0 00から2 30の部分を切り取って、「out.mp3」に保存 $ cutmp3 -i file.mp3 -a 0 00 -b 2 30 -O out.mp3 cutmp3 -i file.mp3 で入ると対話環境 ■編集位置の移動 1 2 3 4 5 , -10分 -1分 -10秒 -1秒 -0.1秒 -1フレーム 6 7 8 9 0 . +10分 +1分 +10秒 +1秒 +0.1秒 +1フレーム ■開始位置のセットa ■終了位置のセットb ■セーブs cutmp3 - a small mp3 editor imageプラグインエラー ご指定のURLはサポートしていません。png, jpg, gif などの画像URLを指定してください。 動画プレーヤー:SMPlayer 再生中の動画のスクリーンショットを連続撮影して、png形式の画像として次々と自動保存していくことができる Synapticから「smplayer」で検索してインストール PDFに手書きメモやスケッチを追記する Xournal Synapticから「xournal」で検索してインストール 複数のページに分かれたPDFを1つにマージする pdftkとpdfchain CUIツールのpdftkと GUIフロントエンドのpdfchain それぞれSynapticで検索してインストール Mobile Media Converter add the Medubuntu repositories $ sudo -E wget --output-document=/etc/apt/sources.list.d/medibuntu.list http //www.medibuntu.org/sources.list.d/$(lsb_release -cs).list sudo apt-get --quiet update sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring sudo apt-get --quiet update$ sudo apt-get install app-install-data-medibuntu apport-hooks-medibuntu uninstall ffmpeg from the repository $ sudo apt-get remove ffmpeg install ffmpeg from Medubuntu and the extra libraries $ sudo apt-get install ffmpeg libavcodec-extra-53 install http //www.miksoft.net/mobileMediaConverterUbuntu.htm gdebi-gtk (thanks to HOWTO Easily enable MP3, MPEG4, AAC, and other restricted encoders in FFmpeg - Ubuntu Forums)
https://w.atwiki.jp/msi_wind/pages/34.html
カスタマイズに関する情報 BIOSアップデート Bluetooth Stack変更 Mac OS X Snow Leopard 10.6 Ubuntu トリプルブート メモリ増設 壁紙 熱処理改善 ; この手順の前提 U100で動作したSLをTimeMachineにてバックアップしている バックアップしたSLにはNetBookInstallerをコピーしてある SL、Win7、Ubuntu9.10のトリプルブート環境を構築する この手順を実行した環境 U100 Vogue (RAM 2GB、HD 320GB) 外付け光学ドライブ (BUFFALOのBDドライブを使用) この手順で使ったインストールメディア (a) NetBookBootMakerで作成したSDカード (b) Ubuntu NetBook Remix 9.10を焼いたメディア [準備] (1) (b)で起動後「日本語」を選び「Ubuntuをインストール(I)」を指定 (2) 「ようこそ」の画面になったら Ctrl+Alt+F2 キーで2番目の端末へ移動後、下記を順に実行 sudo dd if=/dev/zero of=/dev/sda bs=512 count=1 sudo reboot [SLインストール] (1) (a)でU100を起動。 (2) SLリテールを起動ディスクとして起動 (3) ディスクユーティリティで内蔵HDのパーティションを設定(初期化) FAT(40GB) ubuntu用(root) FAT(90GB) Window用 HFS(4GB) ubuntu用(swap) HFS(残り) SL用 (4) Time Machineのバックアップよりシステムを復元 (5) 復元終了後、(1)と同様に(a)でU100を起動 (6) SLを復元したHFSを起動ディスクとして起動 (7) 起動後、NetbookInstallerを起動し、Chameleonのみインストール これで起動時にChameleonによるブート画面が表示され、SLで起動可能となる。 [Ubuntuインストール] (1) (b)で起動後、「日本語」を選び「Ubuntuをインストール(I)」を指定 (2) 「ようこそ」の画面になったら Ctrl+Alt+F2 キーで2番目の端末へ移動後、下記を順に実行 sudo fdisk /dev/sda t 2 83 w sudo mke2fs -j /dev/sda2 y (3) Alt+F7 キーで7番目の端末へ移動後「進む(F)」→「進む(F)」→「進む(F)」 (4) 「どこに Ubuntu 9.10 をインストールしますか?」→「手動でパーティションを設定する」→「進む(F)」 (5) 「/dev/sda2 ext3 ...」の行を選択し「パーティションを編集」 (6) 「利用方法 」→「ext3 ...」、「パーティションの初期化 」はそのまま、「マウントポイント 」→「/」→「OK」 (7) 「進む(F)」→「続ける」→「続ける」 (8) 「あなたは誰ですか?」を設定後「進む(F)」→「インストール」 (9) 「インストールが完了しました」の画面になったら Ctrl+Alt+F2 キーで2番目の端末へ移動後、下記を実行 sudo mkswap /dev/sda4 sudo vi /etc/fstab G o /dev/sda4 none swap sw 0 0 [Esc] wq sudo reboot これでGRUBのブート画面が表示され、ubuntuが起動可能となる。 このブート画面からMacOSXを起動することはできない。 [SLとubuntuのデュアルブート環境を構築] (1) ubuntuを起動する (2) ターミナルを起動する (3) ubuntuのPBRへGRUBをインストールする sudo grub-setup -f /dev/sda2 (4) (a)でU100を起動。 (5) SLリテールを起動ディスクとして起動 (6) NetbookInstallerを起動し、Chameleonのみインストール (7) ターミナルで以下を実行 sudo fdisk -e /dev/disk0 flag 4 write y exit (printコマンドにより現状のアクティブパーティションの確認が可能) これで 電源投入後、Chameleonのブート画面を表示。 → 放置しておくとSL起動 → 何かキーを押すと起動ディスク選択モードに遷移 SL選択でSL起動、Linux選択でGRUB画面へ遷移 となる [Win7インストール] Wikiの「Snow Leopard 10.6」記載の説明に従ってインストールする。 Windows用として用意したパーティションへインストールできない場合がある。(「gptのパーティションの形式ではありません」というエラーが出る) これはubuntuで何らかの操作を行った時にパーティションの情報がおかしくなってしまうからと思われる。 こうなった場合、現状の解決策は「最初からやり直し」のみである。
https://w.atwiki.jp/amslracing/pages/31.html
FrontPage #nofollow #norelated ubuntuに関係する便利な事を書いてくれ。 バックアップ及び復旧 [#y7b7bd36]バックアップのとり方 [#c8dc3b8b] 復旧のやり方 [#t19c5aa9] バックアップ及び復旧 [#y7b7bd36] バックアップのとり方 [#c8dc3b8b] 以下のコマンドで,すべてのファイルを圧縮できる。 (時間の目安は5GBを15分ほどで完了) $ sudo su # cd / $ tar cvpzf backup.tgz --exclude=/proc --exclude=/lost+found --exclude=/backup.tgz --exclude=/mnt --exclude=/sys / その後、/root直下にできるbackup.tgzをどこかに移して終わり。 復旧のやり方 [#t19c5aa9] 以下のコマンドを実行すると復旧出来る(…ハズ。) (このコマンドではファイル全部を書き換えてしまうので注意) $ tar xvpfz backup.tgz -C / $ mkdir proc $ mkdir lost+found $ mkdir mnt $ mkdir sys そして再起動 (幸か不幸か、使用したことは無いので、委細不明。) COLOR(#333399){Author 14th stanaka}
https://w.atwiki.jp/pclinuxtips/pages/16.html
ubuntu 10.04 LTSをPXEネットワークインストールする インストールイメージ送り出し側サーバの設定 dhcpサーバ構築 tftpサーバ構築 イメージ配置 apache公開ディレクトリ/var/www/html/iso/ubuntu1004_server_x64/を作成。インストールCD isoイメージの内容を、上のディレクトリにそっくりコピーする。ネットワークインストール時に、レポジトリを 192.168.0.1, /is/ubuntu1004_server_x64を指定する。 ブート設定 # mkdir /tftpboot/ubuntu1004_server_x64 # cd /tftpboot/ubuntu1004_server_x64 # wget http //ftp.riken.go.jp/Linux/ubuntu/dists/lucid/main/installer-amd64/current/images/netboot/netboot.tar.gz # tar -zxvf netboot.tar.gz # cd .. # cp -a ubuntu1004_server_x64/ubuntu-installer . 補足 # cat ubuntu-installer/amd64/pxelinux.cfg/default pxelinux.cfg/default # vi pxelinux.cfg/default または(b) # cp ubuntu-installer/amd64/pxelinux.cfg/default pxelinux.cfg/(target mac) TIPS ubuntu 10.04 LTS amd64 Server desktop -- NG, 画面が表示されない alternate -- OK, インストール後、grub2 edir, xorg.confを作成 Ubuntu 10.04 amd64 のインストールメモ CPU Athlon 3400e Chipset SB600, RS690M-Radeon X1200 amd64版 ■desktop インストール不可。画面が表示されない ■alternate (1)textモード、または、grubに 『nomodeset』を追加しないと画面が正常に表示されない。 (2)ブート時にescキーを押し、grbubメニューを表示させる。 (3)F6キーを押し、編集モードに以降する。 (4)インストール時は、行の最右に「nomodeset」を追加、ctrl+x でブートする。 (5)その後のブート時はlinux行に、「nomodeset」を追加しブートする。 (6)インストール完了後は、GRUB2の編集を行う。 手順は/etc/default/grub を編集して GRUB_CMDLINE_LINUX に nomodeset を追加し、sudo update-grub を実行する (7)起動すると、640x480でしか表示できない。/etc/X11/xorg.confを新規作成し、再起動すると、1280x1024まで表示可能になる。以下は一例です。 Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection ■server (1)textモード、または、grubに 『nomodeset』を追加しないと画面が正常に表示されない。 (2)ブート時にescキーを押し、grbubメニューを表示させる。 (3)F6キーを押し、編集モードに以降する。 (4)インストール時は、行の最右に「nomodeset」を追加、ctrl+x でブートする。 (5)その後のブート時はlinux行に、「nomodeset」を追加しブートする。 (6)インストール完了後は、GRUB2の編集を行う。 手順は/etc/default/grub を編集して GRUB_CMDLINE_LINUX に nomodeset を追加し、sudo update-grub を実行する
https://w.atwiki.jp/duchida/pages/28.html
!GuestOSとHostOSでファイル共有 http //wiki.livedoor.jp/ubun2/d/Viva!%20Ubuntu%20Magazine%20vol.9%20VMware%20Part%20II !ubuntuのvmware serverでUSBデバイスを認識しない。 http //ubuntuforums.org/showthread.php?p=3630067 /etc/init.d/mountdevsubfs.sh 次の4行のコメントアウトを外す。 #mkdir -p /dev/bus/usb/.usbfs #domount usbfs "" /dev/bus/usb/.usbfs -obusmode=0700,devmode=0600,listmode=0644 #ln -s .usbfs/devices /dev/bus/usb/devices #mount --rbind /dev/bus/usb /proc/bus/usb /proc/bus/usbがVMwareの期待通りに機能していないことが原因らしい。
https://w.atwiki.jp/beaglemasa/pages/43.html
Mundo Geek deb http //ppa.launchpad.net/zootropo/ubuntu/ intrepid main アップデートすると下記のメッセージがでます。その回避方法は。。。。。 W GPG error http //ppa.launchpad.net intrepid Release 公開鍵を利用できないため、以下の署名は検証できませんでした NO_PUBKEY 60D11217247D1CFF 回避方法は。。。。。下記のコマンドを gpg --recv-key --keyserver wwwkeys.eu.pgp.net 60D11217247D1CFF gpg --export 60D11217247D1CFF | sudo apt-key add - sudo apt-get update WineHQのレポジトリ deb http //wine.budgetdedicated.com/apt intrepid main #WineHQ - Ubuntu 8.10 “Intrepid Ibex” レポジトリの登録はこれで完了. 認証キーをインポートしないと警告が出ます。 以下のリンクを右クリックで保存します。 認証キーをダウンロード 保存した認証キーをインポートします。 [認証]→[鍵ファイルのインポート]をクリックします。
https://w.atwiki.jp/parepan/pages/193.html
ubuntu ネットワーク設定 ubuntu スタテックルート情報設定 runlecelの変更方法 ubuntu mailコマンドを使えるようにするには sshへの不正ログインを検知 軽量ディスクトップのLXDEを使う スクロールバーを細くする ゜゜フォントサイズの設定 左上のUbuntuマークを゜カスタマイズ゜ GNOME 端末の画面サイズ設定 「Ciso vpnclient」をUbuntu-9.10-Desktop にインストールする 「Ciso AnyConnect VPN Client」をLinuxにインストールする Ubuntuの日本語環境 ディレクトリ名を英語に変更